Customization: | Available |
---|---|
After-sales Service: | Support |
Warranty: | 12 Months |
Availability: | |
---|---|
Quantity: | |
The Auto 200bph 19L 22L Water Production Line represents a paradigm shift in large-volume water bottling, integrating cutting-edge automation with industrial-grade durability. This turnkey system orchestrates rinsing, filling, capping, and labeling into a seamless workflow, delivering 200 bottles per hour with ±0.5% volume accuracy—critical for bulk water suppliers managing strict quality standards.
High-Capacity Output: Sustains 200bph throughput for 19L/22L containers, with a 99.8% uptime rate during continuous 16-hour operations.
Sanitary Design: Closed-loop rinsing uses 0.2μm filtered water, while CIP (Clean-in-Place) systems reduce manual cleaning by 80% and meet FDA 21 CFR Part 177 standards.
Intelligent Control: 7-inch touchscreen HMI displays real-time metrics (fill volume, capping torque, conveyor speed) and sends alerts via SMS for abnormal condition.
Energy Efficiency: Variable-frequency drives cut motor energy use by 35%, while heat-recovery systems reuse 60% of rinse water, slashing utility bills.
Flexible Changeover: Tool-less adjustments for bottle height/diameter allow size switching in 12 minutes, supported by color-coded guide rails for error prevention.
Commercial Water Suppliers: Fulfills bulk orders for office water coolers and residential delivery services, with batch tracking for regulatory compliance.
Bottled Water Brands: Maintains mineral water’s natural mineral content through low-shear filling, preserving taste profiles.
Emergency Relief: Rapid deployment modules enable setup in 48 hours for disaster zones, producing 3,200L daily for refugee camps.
Agriculture: Fills UV-sterilized containers for hydroponic nutrient solutions and livestock electrolyte supplements.
Q: Can it handle water with high TDS (Total Dissolved Solids)?
A: Yes, the system includes a pre-filtration bypass to prevent scaling in high-mineral water (up to 1,500 ppm TDS).
Q: What is the power requirement?
A: 380V/3Ph/50Hz, with a maximum consumption of 15kW during peak operation.
Q: Does it support eco-friendly packaging?
A: Compatible with reusable PC (Polycarbonate) bottles and biodegradable shrink sleeves for sustainability-focused brands.
Q: How is bottle integrity checked post-capping?
A: An integrated pressure tester verifies seal tightness, rejecting 0.02% of units with micro-leaks.
The Auto 200bph 19L 22L Water Production Line represents a paradigm shift in large-volume water bottling, integrating cutting-edge automation with industrial-grade durability. This turnkey system orchestrates rinsing, filling, capping, and labeling into a seamless workflow, delivering 200 bottles per hour with ±0.5% volume accuracy—critical for bulk water suppliers managing strict quality standards.
High-Capacity Output: Sustains 200bph throughput for 19L/22L containers, with a 99.8% uptime rate during continuous 16-hour operations.
Sanitary Design: Closed-loop rinsing uses 0.2μm filtered water, while CIP (Clean-in-Place) systems reduce manual cleaning by 80% and meet FDA 21 CFR Part 177 standards.
Intelligent Control: 7-inch touchscreen HMI displays real-time metrics (fill volume, capping torque, conveyor speed) and sends alerts via SMS for abnormal condition.
Energy Efficiency: Variable-frequency drives cut motor energy use by 35%, while heat-recovery systems reuse 60% of rinse water, slashing utility bills.
Flexible Changeover: Tool-less adjustments for bottle height/diameter allow size switching in 12 minutes, supported by color-coded guide rails for error prevention.
Commercial Water Suppliers: Fulfills bulk orders for office water coolers and residential delivery services, with batch tracking for regulatory compliance.
Bottled Water Brands: Maintains mineral water’s natural mineral content through low-shear filling, preserving taste profiles.
Emergency Relief: Rapid deployment modules enable setup in 48 hours for disaster zones, producing 3,200L daily for refugee camps.
Agriculture: Fills UV-sterilized containers for hydroponic nutrient solutions and livestock electrolyte supplements.
Q: Can it handle water with high TDS (Total Dissolved Solids)?
A: Yes, the system includes a pre-filtration bypass to prevent scaling in high-mineral water (up to 1,500 ppm TDS).
Q: What is the power requirement?
A: 380V/3Ph/50Hz, with a maximum consumption of 15kW during peak operation.
Q: Does it support eco-friendly packaging?
A: Compatible with reusable PC (Polycarbonate) bottles and biodegradable shrink sleeves for sustainability-focused brands.
Q: How is bottle integrity checked post-capping?
A: An integrated pressure tester verifies seal tightness, rejecting 0.02% of units with micro-leaks.